Company news
Overheating costs housing companies more than they think

In brief
In issue 7/2026 of the Finnish building services magazine Talotekniikka, ClimaPri CEO Kimmo Pelkonen explains what measurement data from about 40,000 apartments reveals.
Overheating is still common in Finnish apartment buildings, including renovated ones and in the middle of the heating season. According to Pelkonen, the fix comes in three steps: measurement, supply water control based on actual need, and apartment-level optimisation.
Why apartment buildings get too warm
The cause is often simple. The supply water is kept hot, the heating curves are set too high and the thermostats are left to handle the rest. As a result some apartments are too warm, others too cool, and energy is wasted.
Pelkonen’s observations are based on measurement data from about 40,000 apartments. Overheating also occurs in renovated buildings and in the middle of the heating season.
“Even when a building has been renovated and engineering expertise has been used, significant overheating often still occurs.”
Kimmo Pelkonen, CEO, ClimaPri (Talotekniikka 7/2026, translated from Finnish)
How much does overheating cost?
According to Motiva, the Finnish government’s sustainable development company, lowering an overly high room temperature by one degree cuts the heating costs of an apartment building by about 5% on average. But when some apartments are too warm and others too cool, the temperature of the whole building cannot be lowered until the heat is evenly distributed. That is why the first step is knowing which apartments are too warm.
The solution in three steps
- Measurement: apartment temperatures, water consumption and energy. Without measurement nobody knows which apartments are too warm. ClimaPri’s apartment sensor measures indoor conditions and the remote-read water meters measure water use.
- Supply water control based on actual need: the supply water temperature is set to what the apartments really need, not too high just to be safe. See energy control.
- Apartment-level optimisation with smart thermostats: once the baseline is right, apartment thermostats fine-tune the temperature one apartment at a time.
Empty apartments and common areas are underrated savings targets
According to Pelkonen, empty apartments and common areas in particular are often overlooked, even though they hold savings potential. When temperatures are measured in every space, these targets become visible too.
Energy efficiency is a financial decision
According to Pelkonen, the investment produces positive cash flow from the start and can pay for itself in as little as a few years. Energy efficiency is no longer just a technical question but a financial decision.
In the Ikaalisten Kiinteistökonsultit case, for example, district heating consumption fell by 10% in the first comparable month after heating control was introduced.
The full story is in issue 7/2026 of Talotekniikka magazine (in Finnish), written by Jukka Lyytinen.
Frequently asked questions
Why is overheating common even in renovated apartment buildings?
The cause is often in the settings rather than the equipment. The supply water is kept hot, the heating curves are set too high and the thermostats are left to handle the rest. As a result some apartments are too warm and others too cool.
How does a housing company know whether apartments are too warm?
From apartment-level temperature measurements. Without them heating is often adjusted based on residents’ complaints, and overheated apartments may go unnoticed altogether.
Where was the interview with Kimmo Pelkonen published?
In issue 7/2026 of the Finnish building services magazine Talotekniikka, published on 5 November 2026. The article was written by Jukka Lyytinen.
How much does lowering the room temperature by one degree save?
According to Motiva, lowering an overly high room temperature by one degree cuts the heating costs of an apartment building by about 5% on average.
How much is your building overheating?
Apartment-level measurement shows which apartments are too warm and which too cool. We are happy to explain how ClimaPri heating control would work in your building.
