Heating is a building's single largest cost.
ClimaPri measures every apartment and lets you adjust it separately — fully remotely.
Flow temperature to the radiators
40°C
One slider, 24 apartments.
Every complaint turns the heat up. Nobody turns it back down.
The only lever is the setting for the whole building. Press the button five times.
Three things, in this order.
- 1
Measure
The cold ones are found without a phone call. The too-warm ones for the first time.
- 2
Set the limits
The housing company decides on 18–22 °C. The resident adjusts within that.
- 3
Only then turn it down
Once no apartment is too cold, the flow temperature can come down. That is where the saving comes from.
Five places where heating money leaks away.
Open a row to see the reasoning.
Nobody owns the stairwell.
An overheated corridor never sends an email. That is why it is never found.
The property manager adjusts it remotely.
The property manager or the board
- Upper and lower limits for the apartments
- Temperatures and schedules for the common areas
- All apartments in one view
- Away mode, remotely
One apartment at a time, or the whole property at once
- One apartment's limits in one change
- The whole building at once, on the same setting
- Several properties from the same view
The resident adjusts their own apartment themselves
from their phone or straight from the thermostat, within the limits.
Software, not a renovation.
The thermostats are swapped onto the existing radiators.
Let's look at your building first.
What is already installed, and what can be controlled today.
Free. No commitments. A reply within 48 hours.